Environmental catalysis and materials
Basic properties of sintering dust from iron and steel plant and potassium recovery
Received September 25, 2012,Revised November 14, 2012, Accepted , Available online June 06, 2013
Volume ,2013,Pages 1226-1234
With the production of crude steel, China produces several million tons of sintering dusts which contain a great deal of valuable metals such as, K, Na, Zn, Pb. If discharged directly without adequate treatment, these elements can lead to adverse effects on the environment. Therefore, it is very necessary to determine how to separate these elements from the dust before discharge. Several physical and chemical detection methods were used to study the basic properties of sintering dust. At the same time, preliminary experiments on the recovery of the potassium resources from the sintering dust were carried out. The mean particle size of the electrostatic precipitator (ESP) dust determined by a laser granulometer was 41.468 μm. Multi-point BET and single-point BET analysis showed that the surface area of the ESP dust was 2.697 m2/g. XRD measurements detected the following phases in the ESP dust: Fe2O3, Fe3O4, KCl and NaCl, and Fe2O3, Fe3O4 and SiO2 in the water-washed dust. SEM-EDS results proved that in the ESP dust, K mostly existed in the form of KCl particles without being coated. Leaching experiments showed that the KCl in the ESP dust could be separated and recovered by water leaching and fractional crystallization. Through the recovery experiments, the yield of K-Na vaporized crystalline salt was 18.56%, in which the mass fractions of KCl, NaCl, CaSO4 and K2SO4 were about 61.03%, 13.58%, 14.03% and 9.97%, respectively. This process is technically viable and considerable in economic benefit. There was almost no secondary pollution produced in the whole recovery process.
Register an Account
If you do not have an account, create one by clicking the button below, and take full advantage of this site's features.
Register an Account