Treatment of tunnel wash waters – experiments with organic sorbentmaterials. Part II: Removal of toxic metals
PARUCH Adam M , ROSETH Roger
DOI:
Received August 08, 2007,Revised April 01, 2008, Accepted , Available online
Volume 20,2008,Pages 1042-1045
- Summary
- References
- Related Articles
In the first part of the article, the column and the bag experiments concerning removal of polycyclic aromatic hydrocarbons (PAHs)
and nonpolar oil (NPO) from tunnel wash waters using organic sorbent materials have been described. This part presents the results
of removal of toxic metals. The metals of concern (Al, As, Cd, Cr, Cu, Fe, Pb, Mo, Ni, and Zn) were selected based on the priority
toxicant pollutants defined in surface water quality criteria. Concentrations of these metals in the collected e uents varied more than
the concentrations of PAHs and NPO, and thus only metal contents were considered for statistical analyses. These analyses determined
significant di erences (P < 0.05, P < 0.01, and P < 0.001) between the mean metal concentrations in the column e uents and those
in applied wash water of road tunnel. The results obtained during both experiments revealed that the organic sorbents, and in particular
their combination, removed toxic metals more e ectively from wash water of road tunnel than from wash water of tunnel electrostatic
filters. Among the investigated toxicants, Al and Fe showed the highest levels of reduction in the column experiment, 99.7% and 99.6%,
respectively. The lowest reduction levels of 66.0% and 76.2% were found for Pb and Mo, respectively. The results of the bag experiment
showed that even one day treatment of wash waters from tunnel electrostatic filters could reduce concentration of some toxicants by
more than 70% (Al and Fe) and 80% (Cu).
