Hg0 removal from flue gas over different zeolites modified by FeCl3

Hao Qi , WenqingXu , JianWang , LiTong , TingyuZhu


Received February 25, 2014,Revised May 25, 2014, Accepted , Available online February 10, 2015

Volume 27,2015,Pages 110-117

The elemental mercury removal abilities of three different zeolites (NaA, NaX, HZSM-5) impregnated with iron (III) chloride were studied on alab-scale fixed-bed reactor. X-ray diffraction, nitrogen adsorption porosimetry, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and temperature programmed desorption (TPD) analy-ses were used to investigate the physicochemical properties. Results indicated that the pore structure and active chloride species on the surface of the samples are the key factors for physisorption and oxidation of Hg0, respectively. Relatively high surface area and micropore volume are beneficial to efficient mercury adsorption. The active Cl species generated on the surface of the samples were effective oxidants able to convert elemental mercury (Hg0) into oxidized mercury (Hg2+). The crystallization of NaCl due to the ion exchange effect during the impregnation of NaA and NaX reduced the number of active Cl species on the surface, and restricted the physisorption of Hg0. Therefore, the Hg0 removal efficiencies of the samples were inhibited. The TPD analysis revealed that the species of mercury on the surface of FeCl3-HZSM-5 was mainly in the form of mercuric chloride(HgCl2), while on FeCl3-NaX and FeCl3-NaA it was mainly mercuri coxide(HgO).

Copyright © Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.京ICP备05002858号-3