O3 oxidation combined with semi-dry method for simultaneous desulfurization and denitrification of sintering/pelletizing flue gas
Yang Zou , Fagao Liu , Maoyu Cai , Xiaolong Liu , Tingyu Zhu
DOI:10.1016/j.jes.2020.11.021
Received June 03, 2020,Revised , Accepted November 14, 2020, Available online December 23, 2020
Volume 33,2021,Pages 253-263
With the vigorous development of China's iron and steel industry and the introduction of ultra-low emission policies, the emission of pollutants such as SO2 and NOx has received unprecedented attention. Considering the increase of the proportion of semi-dry desulfurization technology in the desulfurization process, several semi-dry desulphurization technologies such as flue gas circulating fluidized bed (CFB), dense flow absorber (DFA) and spray drying absorption (SDA) are briefly summarized. Moreover, a method for simultaneous treatment of SO2 and NOx in sintering/pelletizing flue gas by O3 oxidation combined with semi-dry method is introduced. Meantime, the effects of key parameters such as O3/NO molar ratio, CaSO3, SO2, reaction temperature, Ca/(S+2N) molar ratio, droplet size and approach to adiabatic saturation temperature (AAST) on denitrification and desulfurization are analyzed. Furthermore, the reaction mechanism of denitrification and desulfurization is further elucidated. Finally, the advantages and development prospects of the new technology are proposed.
